Claudemiro Bolfarini

Overview

Best Publications

• Preliminary study on the microstructure and mechanical properties of dissimilar friction stir welds in aircraft aluminium alloys 2024-T351 and 6056-T4

  S.T. Amancio-Filho;S. Sheikhi;J.F. dos Santos;C. Bolfarini

  246
  Citations

• Influence of processing parameters on the fabrication of a Cu-Al-Ni-Mn shape-memory alloy by selective laser melting

  T. Gustmann;A. Neves;U. Kühn;P. Gargarella

  156
  Citations

• Corrosion resistance of Fe-based amorphous alloys

  W.J. Botta;W.J. Botta;J.E. Berger;C.S. Kiminami;V. Roche

  145
  Citations

• Comparative analysis of corrosion resistance between beta titanium and Ti-6Al-4V alloys: A systematic review.

  Juliana Dias Corpa Tardelli;Claudemiro Bolfarini;Andréa Cândido dos Reis

  128
  Citations

• Microstructure and wear behavior of Fe-based amorphous HVOF coatings produced from commercial precursors

  G.Y. Koga;R. Schulz;S. Savoie;A.R.C. Nascimento

  123
  Citations

• Metallurgy and mechanical performance of AZ31 magnesium alloy friction spot welds

  Leonardo Contri Campanelli;Uceu Fuad Hasan Suhuddin;Armando Ítalo Sette Antonialli;Jorge Fernandez dos Santos

  97
  Citations

• Microstructure evolution and mechanical properties of Al-Zn-Mg-Cu alloy reprocessed by spray-forming and heat treated at peak aged condition

  E.M. Mazzer;C.R.M. Afonso;M. Galano;C.S. Kiminami

  87
  Citations

• Formation of Fe-based glassy matrix composite coatings by laser processing

  P. Gargarella;A. Almeida;R.Vilar;C.R.M. Afonso

  84
  Citations

• Corrosion properties of Fe-Cr-Nb-B amorphous alloys and coatings

  G.Y. Koga;R.P. Nogueira;V. Roche;A.R. Yavari

  80
  Citations

• Topological instability as a criterion for design and selection of aluminum-based glass-former alloys

  R. D. Sá Lisboa;C. Bolfarini;C. S. Kiminami

  78
  Citations

• Nanostructured MgH2 prepared by cold rolling and cold forging

  D.R. Leiva;R. Floriano;J. Huot;A.M. Jorge

  73
  Citations

• Microstructure and mechanical properties of a spray formed and extruded AA7050 recycled alloy

  Henrique A. Godinho;André L.R. Beletati;Enrico J. Giordano;Claudemiro Bolfarini

  71
  Citations

• Magnetic properties of spray-formed Fe–6.5%Si and Fe–6.5%Si–1.0%Al after rolling and heat treatment

  Claudemiro Bolfarini;Mário Cézar Alves Silva;Alberto Moreira Jorge;Claudio Shyinti Kiminami

  69
  Citations

• Magnetic properties evaluation of spray formed and rolled Fe–6.5 wt.% Si–1.0 wt.% Al alloy

  A.H. Kasama;C. Bolfarini;C.S. Kiminami;W.J. Botta Filho

  67
  Citations

• Multi-principal element alloys from the CrCoNi family: outlook and perspectives

  Francisco G. Coury;Guilherme Zepon;Claudemiro Bolfarini

  65
  Citations

• Amorphous phase formation in spray deposited AlYNiCo and AlYNiCoZr alloys

  C.R.M Afonso;C Bolfarini;C.S Kiminami;N.D Bassim

  63
  Citations

• Microstructure and mechanical properties of spray deposited hypoeutectic Al-Si alloy

  C.F. Ferrarini;C. Bolfarini;C.S. Kiminami

  63
  Citations

• Degradation of biodegradable implants: The influence of microstructure and composition of Mg-Zn-Ca alloys

  V. Roche;G.Y. Koga;T.B. Matias;C.S. Kiminami

  62
  Citations

• Amorphous phase formation during spray forming of Al84Y3Ni8Co4Zr1 alloy

  C.R.M Afonso;C Bolfarini;C.S Kiminami;N.D Bassim

  57
  Citations

• Corrosion properties of amorphous, partially, and fully crystallized Fe68Cr8Mo4Nb4B16 alloy

  D.D. Coimbrão;G. Zepon;G.Y. Koga;D.A. Godoy Pérez

  57
  Citations

• Sliding wear of spray-formed high-chromium white cast iron alloys

  T.T. Matsuo;C.S. Kiminami;W.J. Botta Fo;C. Bolfarini

  54
  Citations

• Growth of aluminum-free porous oxide layers on titanium and its alloys Ti-6Al-4V and Ti-6Al-7Nb by micro-arc oxidation

  Laís T. Duarte;Claudemiro Bolfarini;Sonia R. Biaggio;Romeu C. Rocha-Filho

  53
  Citations

• Wear resistant coatings of boron-modified stainless steels deposited by Plasma Transferred Arc

  Erich Sigolo;Juliano Soyama;Guilherme Zepon;Claudio Shyinti Kiminami

  52
  Citations