Shuncai Wang

Shuncai Wang publication distribution in Materials Science in 2026

The chart shows the distribution of publications by all Research.com ranked scientists in the field of Materials Science in 2026. The highlighted bar marks where Shuncai Wang sits on this spectrum.

Shuncai Wang D-index placement in Materials Science in 2026

The chart shows the D-index (discipline H-index) distribution of Materials Science scientists ranked by Research.com in 2026. The highlighted bar marks where Shuncai Wang sits on this spectrum.

Best Publications

• Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys

  S. C. Wang;M. J. Starink

  1034
  Citations

• A Model for the Yield Strength of Overaged Al-Zn-Mg-Cu Alloys

  M.J. Starink;S.C. Wang

  572
  Citations

• Effect of self-accommodation on α/α boundary populations in pure titanium

  S.C. Wang;M. Aindow;M.J. Starink

  419
  Citations

• Two types of S phase precipitates in Al–Cu–Mg alloys

  S.C. Wang;M.J. Starink

  401
  Citations

• Precipitation hardening in Al¿Cu¿Mg alloys revisited

  S.C. Wang;M.J. Starink;N. Gao

  346
  Citations

• The study of aluminium anodes for high power density Al/Air batteries with brine electrolytes

  Maria Nestoridi;Derek Pletcher;Robert J.K. Wood;Shuncai Wang

  249
  Citations

• The electrodeposition of composite coatings: Diversity, applications and challenges

  Frank C. Walsh;Shuncai Wang;Nan Zhou;Nan Zhou

  236
  Citations

• The thermodynamics of and strengthening due to co-clusters: General theory and application to the case of Al–Cu–Mg alloys

  M.J. Starink;S.C. Wang

  215
  Citations

• The strength of friction stir welded and friction stir processed aluminium alloys

  M.J. Starink;A. Deschamps;S.C. Wang

  194
  Citations

• Estimation of dislocation densities in cold rolled Al-Mg-Cu-Mn alloys by combination of yield strength data, EBSD and strength models

  S. C. Wang;Z. Zhu;M. J. Starink

  173
  Citations

• Fabrication of CrAlN nanocomposite films with high hardness and excellent anti-wear performance for gear application

  Liping Wang;Liping Wang;Guangan Zhang;R.J.K. Wood;S.C. Wang

  144
  Citations

• Hardening of an Al–Cu–Mg alloy containing Types I and II S phase precipitates

  T.S. Parel;S.C. Wang;M.J. Starink

  130
  Citations

• Self-lubricating Ni-P-MoS2 composite coatings

  Y. He;S.C. Wang;F.C. Walsh;Y.-L. Chiu

  129
  Citations

• Improved Tribological Behavior of DLC Films Under Water Lubrication by Surface Texturing

  Qi Ding;Liping Wang;Yongxin Wang;S. C. Wang

  127
  Citations

• Quench sensitivity of toughness in an Al alloy: direct observation and analysis of failure initiation at the precipitate free zone

  T.F. Morgeneyer;T.F. Morgeneyer;M.J. Starink;S.C. Wang;I. Sinclair

  118
  Citations

• Preparation and performance of a novel multifunctional plasma electrolytic oxidation composite coating formed on magnesium alloy

  Jie Guo;Liping Wang;S. C. Wang;J. Liang

  115
  Citations

• Relations between microstructure, precipitation, age-formability and damage tolerance of Al-Cu-Mg-Li (Mn,Zr,Sc) alloys for age forming

  M.J. Starink;N. Gao;N. Kamp;S.C. Wang

  109
  Citations

• The assessment of GPB2/S structures in Al-Cu-Mg alloys

  S.C. Wang;M.J. Starink

  107
  Citations

• Influence of microstructure on the erosion and erosion–corrosion characteristics of 316 stainless steel

  R.J.K. Wood;J.C. Walker;T.J. Harvey;S.C. Wang

  99
  Citations

• An electrodeposited Ni-P-WS2 coating with combined super-hydrophobicity and self-lubricating properties

  Y. He;Y. He;W.T. Sun;S.C. Wang;P.A.S. Reed

  98
  Citations

• Scalable high-mobility MoS2 thin films fabricated by an atmospheric pressure chemical vapor deposition process at ambient temperature

  Chung-Che Huang;Feras Al-Saab;Yudong Wang;Jun-Yu Ou

  89
  Citations