Yishi Su

Overview

Best Publications

• Enhanced Mechanical Properties of Graphene (Reduced Graphene Oxide)/Aluminum Composites with a Bioinspired Nanolaminated Structure

  Zan Li;Qiang Guo;Zhiqiang Li;Genlian Fan

  485
  Citations

• “Egg-Box”-Assisted Fabrication of Porous Carbon with Small Mesopores for High-Rate Electric Double Layer Capacitors

  Danmiao Kang;Qinglei Liu;Jiajun Gu;Yishi Su

  354
  Citations

• Balanced strength and ductility in CNT/Al composites achieved by flake powder metallurgy via shift-speed ball milling

  Run Xu;Zhanqiu Tan;Dingbang Xiong;Genlian Fan

  243
  Citations

• Uniform dispersion of graphene oxide in aluminum powder by direct electrostatic adsorption for fabrication of graphene/aluminum composites

  Zan Li;Genlian Fan;Zhanqiu Tan;Qiang Guo

  217
  Citations

• Strengthening and toughening mechanisms in graphene-Al nanolaminated composite micro-pillars

  Siwen Feng;Qiang Guo;Zan Li;Genlian Fan

  209
  Citations

• Synergistic strengthening effect of graphene-carbon nanotube hybrid structure in aluminum matrix composites

  Zan Li;Genlian Fan;Qiang Guo;Zhiqiang Li

  200
  Citations

• Composite structure modeling and mechanical behavior of particle reinforced metal matrix composites

  Yishi Su;Qiubao Ouyang;Wenlong Zhang;Zhiqiang Li

  187
  Citations

• Enhanced interfacial bonding and mechanical properties in CNT/Al composites fabricated by flake powder metallurgy

  Genlian Fan;Yue Jiang;Zhanqiu Tan;Qiang Guo

  185
  Citations

• Simultaneously achieving thermal insulation and rapid water transport in sugarcane stems for efficient solar steam generation

  Jie Liu;Qinglei Liu;Dongling Ma;Yang Yuan

  180
  Citations

• Tailoring the structure and mechanical properties of graphene nanosheet/aluminum composites by flake powder metallurgy via shift-speed ball milling

  Yuanyuan Jiang;Zhanqiu Tan;Run Xu;Genlian Fan

  170
  Citations

• Ag/diatomite for highly efficient solar vapor generation under one-sun irradiation

  Jing Fang;Qinglei Liu;Wang Zhang;Jiajun Gu

  164
  Citations

• 3D Microstructure-based finite element modeling of deformation and fracture of SiCp/Al composites

  Jie Zhang;Qiubao Ouyang;Qiang Guo;Zhiqiang Li

  160
  Citations

• Particle size effect on the interfacial properties of SiC particle-reinforced Al-Cu-Mg composites

  Xiaolei Guo;Qiang Guo;Junhui Nie;Zhiying Liu

  133
  Citations

• Strain-rate dependent deformation mechanism of graphene-Al nanolaminated composites studied using micro-pillar compression

  Lei Zhao;Qiang Guo;Zan Li;Zhiqiang Li

  125
  Citations

• Regain Strain-Hardening in High-Strength Metals by Nanofiller Incorporation at Grain Boundaries.

  Zan Li;Haotian Wang;Qiang Guo;Zhiqiang Li

  113
  Citations

• Strong and ductile particulate reinforced ultrafine-grained metallic composites fabricated by flake powder metallurgy

  Xizhou Kai;Zhiqiang Li;Genlian Fan;Qiang Guo

  113
  Citations

• Reinforcement with intragranular dispersion of carbon nanotubes in aluminum matrix composites

  Qibing Liu;Genlian Fan;Zhanqiu Tan;Qiang Guo

  110
  Citations

• Achieving simultaneous enhancement of strength and ductility in Al matrix composites by employing the synergetic strengthening effect of micro- and nano-SiCps

  Unknown

  102
  Citations

• Enhanced mechanical behavior and fabrication of silicon carbide particles covered by in-situ carbon nanotube reinforced 6061 aluminum matrix composites

  Shisheng Li;Yishi Su;Xinhai Zhu;Huiling Jin

  100
  Citations

• Fabrication of graphite film/aluminum composites by vacuum hot pressing: Process optimization and thermal conductivity

  Yu Huang;Yishi Su;Shisheng Li;Qiubao Ouyang

  99
  Citations

• Enhanced strength and ductility in particulate-reinforced aluminum matrix composites fabricated by flake powder metallurgy

  X.Z. Kai;Z.Q. Li;G.L. Fan;Q. Guo

  94
  Citations

• Design of an efficient flake powder metallurgy route to fabricate CNT/6061Al composites

  Malin Chen;Genlian Fan;Zhanqiu Tan;Dingbang Xiong

  87
  Citations