Piotr Niesłony

Best Publications

• Ecological trends in machining as a key factor in sustainable production – A review

  G. M. Krolczyk;R.W. Maruda;J. B. Krolczyk;Szymon Wojciechowski

  426
  Citations

• Investigation of tool wear in the turning of Inconel 718 superalloy in terms of process performance and productivity enhancement

  W. Grzesik;P. Niesłony;W. Habrat;J. Sieniawski

  183
  Citations

• Dry cutting effect in turning of a duplex stainless steel as a key factor in clean production

  G. M. Krolczyk;P. Nieslony;R. W. Maruda;Szymon Wojciechowski

  178
  Citations

• Determination of tool life and research wear during duplex stainless steel turning

  G.M. Krolczyk;P. Nieslony;S. Legutko

  178
  Citations

• Parametric and nonparametric description of the surface topography in the dry and MQCL cutting conditions

  Grzegorz M. Krolczyk;Radoslaw W. Maruda;Jolanta B. Krolczyk;Piotr Niesłony

  171
  Citations

• Tool wear characterizations in finish turning of AISI 1045 carbon steel for MQCL conditions

  Radoslaw W. Maruda;Grzegorz M. Krolczyk;Eugene Feldshtein;Piotr Nieslony

  169
  Citations

• Finite element modelling of temperature distribution in the cutting zone in turning processes with differently coated tools

  W. Grzesik;M. Bartoszuk;P. Nieslony

  161
  Citations

• The influence of the cooling conditions on the cutting tool wear and the chip formation mechanism

  Radoslaw W. Maruda;Grzegorz M. Krolczyk;Piotr Nieslony;Szymon Wojciechowski

  159
  Citations

• Application of signal to noise ratio and grey relational analysis to minimize forces and vibrations during precise ball end milling

  Szymon Wojciechowski;Radosław W. Maruda;Grzegorz M. Krolczyk;Piotr Niesłony

  157
  Citations

• A computational approach to evaluate temperature and heat partition in machining with multilayer coated tools

  W. Grzesik;P. Nieslony

  155
  Citations

• Friction and wear testing of multilayer coatings on carbide substrates for dry machining applications

  W. Grzesik;Z. Zalisz;P. Nieslony

  148
  Citations

• Surface quality and topographic inspection of variable compliance part after precise turning

  P. Nieslony;G. M. Krolczyk;Szymon Wojciechowski;R. Chudy

  131
  Citations

• Surface morphology analysis of Duplex Stainless Steel (DSS) in Clean Production using the Power Spectral Density

  G. M. Krolczyk;R. W. Maruda;P. Nieslony;Michał Wieczorowski

  126
  Citations

• Optimisation of machining parameters during ball end milling of hardened steel with various surface inclinations

  S. Wojciechowski;R. Maruda;S. Barrans;Piotr Niesłony

  112
  Citations

• Tool Wear Patterns and Their Promoting Mechanisms in Hybrid Cooling Assisted Machining of Titanium Ti-3Al-2.5V/grade 9 Alloy

  Unknown

  109
  Citations

• Microhardness and Surface Integrity in Turning Process of Duplex Stainless Steel (DSS) for Different Cutting Conditions

  G. Krolczyk;P. Nieslony;S. Legutko

  107
  Citations

• Investigations on friction and wear mechanisms of the PVD-TiAlN coated carbide in dry sliding against steels and cast iron

  W. Grzesik;Z. Zalisz;S. Krol;P. Nieslony

  105
  Citations

• Comparison of Tool Wear, Surface Morphology, Specific Cutting Energy and Cutting Temperature in Machining of Titanium Alloys Under Hybrid and Green Cooling Strategies

  Unknown

  101
  Citations

• Physics based modelling of interface temperatures in machining with multilayer coated tools at moderate cutting speeds

  W. Grzesik;P. Nieslony

  98
  Citations

• Structural and Microhardness Changes After Turning of the AISI 1045 Steel for Minimum Quantity Cooling Lubrication

  Radoslaw W. Maruda;Grzegorz M. Krolczyk;Mariusz Michalski;Piotr Nieslony

  96
  Citations