James L. White

Overview

Best Publications

• Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocomposites

  H. R. Dennis;D. L. Hunter;D. Chang;S. Kim

  1341
  Citations

• Shear flow rheological properties, fiber damage, and mastication characteristics of aramid-, glass-, and cellulose-fiber-reinforced polystyrene melts

  Lech Czarnecki;James L. White

  303
  Citations

• Development of phase morphology in incompatible polymer blends during mixing and its variation in extrusion

  Kyonsuku Min;James L. White;John F. Fellers

  293
  Citations

• Experimental investigations of shear and elongational flow properties of polystyrene melts reinforced with calcium carbonate, titanium dioxide, and carbon black

  Hideho Tanaka;James L. White

  265
  Citations

• An experimental study of the influence of carbon black on the rheological properties of a polystyrene melt

  Vincent M. Lobe;James L. White

  250
  Citations

• Compatibilizing agents in polymer blends : interfacial tension, phase morphology, and mechanical properties

  Cheng Chung Chen;James L. White

  242
  Citations

• A Fundamental Study of the Rheological Properties of Glass‐Fiber‐Reinforced Polyethylene and Polystyrene Melts

  Yu Chan;James L. White;Yasushi Oyanagi

  229
  Citations

• The influence of particle size and surface coating of calcium carbonate on the rheological properties of its suspensions in molten polystyrene

  Yoshiyuki Suetsugu;James L. White

  219
  Citations

• Structure development during polymer processing: Studies of the melt spinning of polyethylene and polypropylene fibers

  Joseph E. Spruiell;James L. White

  210
  Citations

• The influence of titanium dioxide on the rheological and extrusion properties of polymer melts

  Nobuhiko Minagawa;James L. White

  205
  Citations

• Kinematics, dynamics and stability of the tubular film extrusion of various polyethylenes

  Toshitaka Kanai;James L. White

  186
  Citations

• An investigation of instability of phase morphology of blends of nylons with polyethylenes and polystyrenes and effects of compatibilizing agents

  Cheng Chung Chen;Eusebio Fontan;Kyonsuku Min;James L. White

  182
  Citations

• The influence of carbon black on the extrusion characteristics and rheological properties of elastomers: Polybutadiene and butadiene–styrene copolymer

  James L. White;Jerry W. Crowder

  181
  Citations

• Characteristics of hydroxybenzoic acid‐ethylene terephthalate copolymers and their blends with polystyrene, polycarbonate, and polyethylene terephthalate

  Ping Zhuang;Thein Kyu;James L. White

  165
  Citations

• Melt spinning of isotactic polypropylene: Structure development and relationship to mechanical properties

  Hari P. Nadella;Helen M. Henson;Joseph E. Spruiell;James L. White

  164
  Citations

• Experimental investigation of the influence of molecular weight distribution on the rheological properties of polypropylene melts

  Wataru Minoshima;James L. White;Joseph E. Spruiell

  163
  Citations

• Experimental study of elongational flow and failure of polymer melts

  Yoshiaki Ide;James L. White

  162
  Citations

• Flow patterns in polyethylene and polystyrene melts during extrusion through a die entry region: measurement and interpretation

  James L. White;Akio Kondo

  161
  Citations

• The specification of orientation and its development in polymer processing

  James L. White;Joseph E. Spruiell

  154
  Citations

• Orientation and morphology of high‐density polyethylene film produced by the tubular blowing method and its relationship to process conditions

  Kyung‐Ju Choi;Joseph E. Spruiell;James L. White

  148
  Citations

• Hydroxypropylcellulose, a thermotropic liquid crystal: Characteristics and structure development in continuous extrusion and melt spinning

  Kaoru Shimamura;James L. White;John F. Fellers

  147
  Citations