G.D. Janaki Ram

Overview

Best Publications

• Influence of Defects on Mechanical Properties of Ti-6Al-4V Components Produced by Selective Laser Melting and Electron Beam Melting

  Haijun Gong;Khalid Rafi;Hengfeng Gu;G.D. Janaki Ram

  983
  Citations

• Microstructure and tensile properties of Inconel 718 pulsed Nd-YAG laser welds

  G.D. Janaki Ram;A. Venugopal Reddy;K. Prasad Rao;G.M. Reddy

  341
  Citations

• Control of Laves phase in Inconel 718 GTA welds with current pulsing

  G.D. Janaki Ram;A. Venugopal Reddy;K. Prasad Rao;G. Madhusudhan Reddy

  226
  Citations

• Use of ultrasonic consolidation for fabrication of multi‐material structures

  G.D. Janaki Ram;C. Robinson;Y. Yang;B.E. Stucker

  211
  Citations

• Effect of process parameters on bond formation during ultrasonic consolidation of aluminum alloy 3003

  G.D. Janaki Ram;Y. Yang;B.E. Stucker

  205
  Citations

• Microstructural refinement of weld fusion zones in α-β titanium alloys using pulsed current welding

  S. Sundaresan;G.D. Janaki Ram;G. Madhusudhan Reddy

  193
  Citations

• Bond formation and fiber embedment during ultrasonic consolidation

  Y. Yang;G.D. Janaki Ram;B.E. Stucker

  189
  Citations

• Additive manufacturing of an aluminum matrix composite reinforced with nanocrystalline high-entropy alloy particles

  G.M. Karthik;Santhanu Panikar;G.D. Janaki Ram;Ravi Sankar Kottada

  188
  Citations

• Microstructure and tensile properties of friction welded aluminum alloy AA7075-T6

  H. Khalid Rafi;G.D. Janaki Ram;G. Phanikumar;K. Prasad Rao

  182
  Citations

• Effect of different carbon nano-fillers on rheological properties and lap shear strength of epoxy adhesive joints

  Panta Jojibabu;M. Jagannatham;Prathap Haridoss;G.D. Janaki Ram

  177
  Citations

• Microstructure and mechanical properties of Inconel 718 electron beam welds

  G. D. Janaki Ram;A. Venugopal Reddy;K. Prasad Rao;G. Madhusudhan Reddy

  151
  Citations

• Microstructure and wear properties of LENS deposited medical grade CoCrMo.

  G. D. Janaki Ram;C. K. Esplin;B. E. Stucker

  150
  Citations

• Microstructural refinement through inoculation of type 7020 Al–Zn–Mg alloy welds and its effect on hot cracking and tensile properties

  G.D Janaki Ram;T.K Mitra;V Shankar;S Sundaresan

  142
  Citations

• Microstructure and Mechanical Properties of Friction Stir Lap Welded Aluminum Alloy AA2014

  S. Babu;G.D. Janaki Ram;P.V. Venkitakrishnan;G. Madhusudhan Reddy

  137
  Citations

• Use of Friction Surfacing for Additive Manufacturing

  J. J. S. Dilip;S. Babu;S. Varadha Rajan;K. H. Rafi

  133
  Citations

• Microstructural evolution during friction surfacing of tool steel H13

  H. Khalid Rafi;G.D. Janaki Ram;G. Phanikumar;K. Prasad Rao

  132
  Citations

• Microstructural evolution and mechanical behavior of nickel aluminum bronze Cu-9Al-4Fe-4Ni-1Mn fabricated through wire-arc additive manufacturing

  C. Dharmendra;A. Hadadzadeh;A. Hadadzadeh;B.S. Amirkhiz;B.S. Amirkhiz;G.D. Janaki Ram;G.D. Janaki Ram

  123
  Citations

• Friction surfaced tool steel (H13) coatings on low carbon steel: A study on the effects of process parameters on coating characteristics and integrity

  H. Khalid Rafi;G.D. Janaki Ram;G. Phanikumar;K. Prasad Rao

  111
  Citations

• Enhancing strength, ductility and machinability of a Al–Si cast alloy by friction stir processing

  P.R. Guru;F. Khan;S.K. Panigrahi;G.D. Janaki Ram

  104
  Citations

• Effect of carbon nano-filler addition on the degradation of epoxy adhesive joints subjected to hygrothermal aging

  Panta Jojibabu;G.D. Janaki Ram;Abhijit P. Deshpande;Srinivasa Rao Bakshi

  100
  Citations

• Dynamic recrystallization in friction surfaced austenitic stainless steel coatings

  Ramesh Puli;G.D. Janaki Ram

  92
  Citations