João Pedro Oliveira

João Pedro Oliveira publication distribution in Materials Science in 2026

The chart shows the distribution of publications by all Research.com ranked scientists in the field of Materials Science in 2026. The highlighted bar marks where João Pedro Oliveira sits on this spectrum.

João Pedro Oliveira D-index placement in Materials Science in 2026

The chart shows the D-index (discipline H-index) distribution of Materials Science scientists ranked by Research.com in 2026. The highlighted bar marks where João Pedro Oliveira sits on this spectrum.

Best Publications

• Processing parameters in laser powder bed fusion metal additive manufacturing

  João Pedro Oliveira;A. D. LaLonde;J. Ma

  794
  Citations

• Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)

  Tiago A. Rodrigues;V. Duarte;R. M. Miranda;Telmo G. Santos

  665
  Citations

• Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice

  J.P. Oliveira;T.G. Santos;R.M. Miranda

  588
  Citations

• Evaluation of Anion Influence on the Formation and Extraction Capacity of Ionic-Liquid-Based Aqueous Biphasic Systems

  Sónia P. M. Ventura;Catarina M. S. S. Neves;Mara G. Freire;Isabel M. Marrucho

  361
  Citations

• Welding and Joining of NiTi Shape Memory Alloys: A Review

  J.P. Oliveira;J.P. Oliveira;R.M. Miranda;F.M. Braz Fernandes

  349
  Citations

• Wire and arc additive manufacturing of HSLA steel: Effect of thermal cycles on microstructure and mechanical properties

  Tiago A. Rodrigues;V. Duarte;Julian A. Avila;Telmo G. Santos

  331
  Citations

• Laser techniques for dissimilar joining of aluminum alloys to steels: A critical review

  Jin Yang;J.P. Oliveira;Yulong Li;Caiwang Tan

  256
  Citations

• Laser beam oscillating welding of 5A06 aluminum alloys: Microstructure, porosity and mechanical properties

  Zhimin Wang;J.P. Oliveira;Zhi Zeng;Xianzheng Bu

  250
  Citations

• Wire and arc additive manufacturing of a Ni-rich NiTi shape memory alloy: microstructure and mechanical properties

  Z. Zeng;B.Q Cong;J.P. Oliveira;W.C Ke

  216
  Citations

• Steel-copper functionally graded material produced by twin-wire and arc additive manufacturing

  Tiago A. Rodrigues;N. Bairrão;Francisco Werley Cipriano Farias;A. Shamsolhodaei

  216
  Citations

• Laser joining of NiTi to Ti6Al4V using a Niobium interlayer

  J.P. Oliveira;J.P. Oliveira;B. Panton;Z. Zeng;Z. Zeng;C.M. Andrei

  215
  Citations

• Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy

  Wenchao Ke;Xianzheng Bu;João Pedro Oliveira;Wei Gang Xu

  200
  Citations

• Multi-layer deposition mechanism in ultra high-frequency pulsed wire arc additive manufacturing (WAAM) of NiTi shape memory alloys

  W.C. Ke;J.P. Oliveira;B.Q. Cong;S.S. Ao

  177
  Citations

• Gas tungsten arc welding of as-rolled CrMnFeCoNi high entropy alloy

  J.P. Oliveira;T.M. Curado;Z. Zeng;J.G. Lopes

  172
  Citations

• Hot forging wire and arc additive manufacturing (HF-WAAM)

  Valdemar R. Duarte;Tiago A. Rodrigues;N. Schell;R. M. Miranda

  153
  Citations

• Dissimilar laser welding of a CoCrFeMnNi high entropy alloy to 316 stainless steel

  J.P. Oliveira;Jiajia Shen;Z. Zeng;Jeong Min Park

  150
  Citations

• In-situ strengthening of a high strength low alloy steel during Wire and Arc Additive Manufacturing (WAAM)

  Tiago A. Rodrigues;V. R. Duarte;D. Tomás;Julian A. Avila

  149
  Citations

• An Overview of High-Entropy Alloys as Biomaterials

  Diogo Castro;Pedro Jaeger;Ana Catarina Baptista;João Pedro Oliveira

  144
  Citations

• Effect of heat treatments on 316 stainless steel parts fabricated by wire and arc additive manufacturing : Microstructure and synchrotron X-ray diffraction analysis

  Tiago A. Rodrigues;J.D. Escobar;Jiajia Shen;Valdemar R. Duarte

  137
  Citations

• Dissimilar laser welding of superelastic NiTi and CuAlMn shape memory alloys

  J.P. Oliveira;J.P. Oliveira;J.P. Oliveira;Z. Zeng;C. Andrei;F.M. Braz Fernandes

  129
  Citations

• Effect of milling parameters on HSLA steel parts produced by Wire and Arc Additive Manufacturing (WAAM)

  J.G. Lopes;Carla M. Machado;Valdemar R. Duarte;Tiago A. Rodrigues

  128
  Citations

• Effects of laser processing on the transformation characteristics of NiTi: A contribute to additive manufacturing

  J.P. Oliveira;J.P. Oliveira;A.J. Cavaleiro;A.J. Cavaleiro;N. Schell;Andreas Stark

  123
  Citations

• Vinorelbine and cisplatin in metastatic squamous cell carcinoma of the oesophagus: response, toxicity, quality of life and survival

  T. Conroy;P.-L. Etienne;A. Adenis;M. Ducreux

  117
  Citations