Behrouz Bagheri

Best Publications

• Simulation and experimental study of dynamic recrystallization process during friction stir vibration welding of magnesium alloys

  Mahmoud Abbasi;Behrouz Bagheri;Farzaneh Sharifi

  132
  Citations

• Comparison of the Weldability of AA6061-T6 Joint under Different Friction Stir Welding Conditions

  Amin Abdollahzadeh;Behrouz Bagheri;Mahmoud Abassi;Amir Hossein Kokabi

  128
  Citations

• Effect of second-phase particle size and presence of vibration on AZ91/SiC surface composite layer produced by FSP

  Behrouz Bagheri;Mahmoud Abbasi;Amin Abdollahzadeh;Amin Abdollahzadeh;Seyyed Ehsan Mirsalehi

  115
  Citations

• Application of response surface methodology to drive GTN model parameters and determine the FLD of tailor welded blank

  M. Abbasi;B. Bagheri;M. Ketabchi;D.F. Haghshenas

  113
  Citations

• A different attempt to improve the formability of aluminum tailor welded blanks (TWB) produced by the FSW

  Mahmoud Abbasi;Behrouz Bagheri;Amin Abdollahzadeh;Ahmad Ostovari Moghaddam

  102
  Citations

• Investigation of SiC Nanoparticle Size and Distribution Effects on Microstructure and Mechanical Properties of Al/SiC/Cu Composite during the FSSW Process: Experimental and Simulation

  Unknown

  97
  Citations

• The effect of FSP on mechanical, tribological, and corrosion behavior of composite layer developed on magnesium AZ91 alloy surface

  M. Abbasi;B. Bagheri;M. Dadaei;H. R. Omidvar

  92
  Citations

• Fabrication of reinforced Al–Mg composite by TiC particles via FSW: Microstructure and tribology study

  Unknown

  90
  Citations

• Influence of Variation Ambient System on Dissimilar Friction Stir Welding of Al Alloy to Mg Alloy by the Addition of Nanoparticles and Interlayer

  Unknown

  89
  Citations

• Mechanical, wear and corrosion behaviors of AZ91/SiC composite layer fabricated by friction stir vibration processing

  Amin Abdollahzadeh;Behrouz Bagheri;Mahmoud Abbasi;Farzaneh Sharifi

  81
  Citations

• Nanoparticles Addition in AA2024 Aluminum/Pure Copper Plate: FSSW Approach, Microstructure Evolution, Texture Study, and Mechanical Properties

  Unknown

  81
  Citations

• Mechanical Behavior and Microstructure of AA6061-T6 Joints Made by Friction Stir Vibration Welding

  Behrouz Bagheri;Mahmoud Abbasi;Mostafa Dadaei

  80
  Citations

• A comparative study between friction stir processing and friction stir vibration processing to develop magnesium surface nanocomposites

  Behrouz Bagheri;Mahmoud Abbasi;Amin Abdollahzadeh;Amin Abdollahzadeh;Amir Hossein Kokabi

  79
  Citations

• Study on the effect of the welding environment on the dynamic recrystallization phenomenon and residual stresses during the friction stir welding process of aluminum alloy

  Mahmoud Abbasi;Amin Abdollahzadeh;Behrouz Bagheri;Ahmad Ostovari Moghaddam

  79
  Citations

• Numerical analysis of cooling and joining speed effects on friction stir welding by smoothed particle hydrodynamics (SPH)

  Behrouz Bagheri;Mahmoud Abbasi;Amin Abdolahzadeh;Amin Abdolahzadeh;Amir Hossein Kokabi

  74
  Citations

• Microstructure and mechanical characteristics of AA6061-T6 joints produced by friction stir welding, friction stir vibration welding and tungsten inert gas welding: A comparative study

  Behrouz Bagheri;Mahmoud Abbasi;Amin Abdollahzadeh

  73
  Citations

• Investigations into the formation of intermetallic compounds during pinless friction stir spot welding of AA2024-Zn-pure copper dissimilar joints

  Unknown

  73
  Citations

• Development of AZ91/SiC surface composite by FSP: effect of vibration and process parameters on microstructure and mechanical characteristics

  Behrouz Bagheri;Mahmoud Abbasi

  72
  Citations

• Development of Al/Cu/SiC bimetallic nano-composite by friction stir spot welding

  Unknown

  72
  Citations

• Microstructures and mechanical properties of friction stir welded dissimilar steel-copper joints

  M. Jafari;M. Abbasi;D. Poursina;A. Gheysarian

  69
  Citations