2026 Lorella Ceschini: Materials Science Researcher – H-Index, Publications & Awards

Discipline name	D-Index	World Ranking	Current World Ranking	National Ranking	Current National Ranking	Publications	Citations
Materials Science	43	12351	11945	283	275	202	6758

Overview

Lorella Ceschini is affiliated with the University of Bologna in Italy. Their research primarily focuses on the field of engineering, with a strong emphasis on mechanical engineering and related subfields.

The main areas of study covered in their work include:

Mechanical Engineering
Automotive Engineering
Aerospace Engineering
Materials Chemistry
Electrical and Electronic Engineering

The scientist's research topics concentrate on materials and processes within additive manufacturing, alongside studies on various alloys and welding techniques. Specific topics they have addressed are:

Additive Manufacturing Materials and Processes
High Entropy Alloys Studies
Additive Manufacturing and 3D Printing Technologies
Aluminum Alloy Microstructure Properties
Aluminum Alloys Composites Properties
Welding Techniques and Residual Stresses
Titanium Alloys Microstructure and Properties

They have published extensively, with key publication venues including:

Metals
Progress in Additive Manufacturing
SSRN Electronic Journal
Materials
Advanced Engineering Materials

Among their recent published papers are:

Tensile properties and microstructural features of 304L austenitic stainless steel produced by wire-and-arc additive manufacturing (2020, The International Journal of Advanced Manufacturing Technology)
CoCr alloy processed by Selective Laser Melting (SLM): effect of Laser Energy Density on microstructure, surface morphology, and hardness (2020, Journal of Manufacturing Processes)
Experimentally-validated orthotropic elastic model for Wire-and-Arc Additively Manufactured stainless steel (2021, Additive Manufacturing)
AA5083 (Al-Mg) plates produced by wire-and-arc additive manufacturing: effect of specimen orientation on microstructure and tensile properties (2021, Progress in Additive Manufacturing)
Role of Direct Aging and Solution Treatment on Hardness, Microstructure and Residual Stress of the A357 (AlSi7Mg0.6) Alloy Produced by Powder Bed Fusion (2021, Metallurgical and Materials Transactions B)

Lorella Ceschini collaborates regularly with several researchers, frequently co-authoring with:

Alessandro Morri
Lavinia Tonelli
Gianluca Di Egidio
Carla Martini
Mattia Zanni

Best Publications

Effect of Selective Laser Melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel

Erica Liverani;Stefania Toschi;Lorella Ceschini;Alessandro Fortunato

997
Citations
Effect of friction stir welding on microstructure, tensile and fatigue properties of the AA7005/10 vol.%Al2O3p composite

Lorella Ceschini;Iuri Boromei;Giangiacomo Minak;Alessandro Morri

312
Citations
Comparison of dry sliding friction and wear of Ti6Al4V alloy treated by plasma electrolytic oxidation and PVD coating

Lorella Ceschini;Elio Lanzoni;Carla Martini;Daria Prandstraller

211
Citations
Tensile properties and microstructural features of 304L austenitic stainless steel produced by wire-and-arc additive manufacturing

Vittoria Laghi;Michele Palermo;Lavinia Tonelli;Giada Gasparini

198
Citations
Tensile and fatigue properties of the AA6061/20 vol% Al2O3p and AA7005/10 vol% Al2O3p composites

Lorella Ceschini;Giangiacomo Minak;Alessandro Morri

180
Citations
CoCr alloy processed by Selective Laser Melting (SLM): effect of Laser Energy Density on microstructure, surface morphology, and hardness

Lavinia Tonelli;Alessandro Fortunato;Lorella Ceschini

175
Citations
Correlation between ultimate tensile strength and solidification microstructure for the sand cast A357 aluminium alloy

Lorella Ceschini;Alessandro Morri;Andrea Morri;Alberto Gamberini

172
Citations
Microstructure, tensile and fatigue properties of the Al–10%Si–2%Cu alloy with different Fe and Mn content cast under controlled conditions

Lorella Ceschini;Iuri Boromei;Alessandro Morri;Salem Seifeddine

159
Citations
Microstructure, tensile and fatigue properties of AA6061/20 vol.%Al2O3p friction stir welded joints

Lorella Ceschini;Iuri Boromei;Giangiacomo Minak;Alessandro Morri

156
Citations
Aluminum and Magnesium Metal Matrix Nanocomposites

Lorella Ceschini;Arne Dahle;Manoj Gupta;Anders Eric Wollmar Jarfors

155
Citations
PEO layers obtained from mixed aluminate–phosphate baths on Ti–6Al–4V: Dry sliding behaviour and influence of a PTFE topcoat

Carla Martini;Lorella Ceschini;Fabrizio Tarterini;J. M. Paillard

151
Citations
Fabrication of Co–Cr–Mo endoprosthetic ankle devices by means of Selective Laser Melting (SLM)

Erica Liverani;Alessandro Fortunato;Alberto Leardini;Claudio Belvedere

135
Citations
A comparative study of the tribological behaviour of PVD coatings on the Ti-6Al-4V alloy

Carla Martini;Lorella Ceschini

131
Citations
Improving sliding and abrasive wear behaviour of cast A356 and wrought AA7075 aluminium alloys by plasma electrolytic oxidation

G. Sabatini;L. Ceschini;C. Martini;J.A. Williams

126
Citations
The effect of hot isostatic pressing on the fatigue behaviour of sand-cast A356-T6 and A204-T6 aluminum alloys

Lorella Ceschini;Alessandro Morri;Giuliano Sambogna

125
Citations
Fatigue properties of friction stir welded particulate reinforced aluminium matrix composites

Giangiacomo Minak;Lorella Ceschini;Iuri Boromei;M. Ponte

119
Citations
Tensile and impact behaviour of a microalloyed medium carbon steel: Effect of the cooling condition and corresponding microstructure

Lorella Ceschini;Alessandro Marconi;Carla Martini;Alessandro Morri

117
Citations
Low-temperature carburised AISI 316L austenitic stainless steel: Wear and corrosion behaviour

Lorella Ceschini;Cristina Chiavari;Elio Lanzoni;Carla Martini

112
Citations
Thermal stability of the lightweight 2099 Al-Cu-Li alloy: Tensile tests and microstructural investigations after overaging

E Balducci;L Ceschini;S Messieri;Sigurd Wenner

88
Citations
Friction and wear behaviour of sintered steels submitted to sliding and abrasion tests

Lorella Ceschini;Giuseppe Palombarini;Giuliano Sambogna;Donato Firrao

85
Citations
Experimentally-validated orthotropic elastic model for Wire-and-Arc Additively Manufactured stainless steel

Vittoria Laghi;Lavinia Tonelli;Michele Palermo;Matteo Bruggi

84
Citations