World's Best Scientists 2026 revealed!

D-Index & Metrics

Materials Science

D-Index
46
Citations
8023
World Ranking
11442
National Ranking
349

Overview

Vincent Ji is affiliated with the University of Paris-Saclay in France. Their research primarily spans the fields of Engineering and Materials Science, with significant contributions to subfields such as Mechanical Engineering, Materials Chemistry, Mechanics of Materials, Electrical and Electronic Engineering, and Aerospace Engineering.

The scientist's work focuses on topics related to Surface Treatment and Residual Stress, Metal and Thin Film Mechanics, High Entropy Alloys Studies, Electrodeposition and Electroless Coatings, Metal Alloys Wear and Properties, Additive Manufacturing Materials and Processes, and Erosion and Abrasive Machining.

Vincent Ji has authored numerous publications with notable recent papers including:

  • Toughening effects of Mo and Nb addition on impact toughness and crack resistance of titanium alloys, 2020, Journal of Material Science and Technology
  • Surface characteristics and stress corrosion behavior of AA 7075-T6 aluminum alloys after different shot peening processes, 2022, Surface and Coatings Technology
  • Effect of shot peening on residual stress distribution and tribological behaviors of 17Cr2Ni2MoVNb steel, 2020, Surface and Coatings Technology
  • Influence of Y2O3 nanoparticles on microstructures and properties of electrodeposited Ni-W-Y2O3 nanocrystalline coatings, 2020, Vacuum
  • Microstructures and rolling contact fatigue behaviors of 17Cr2Ni2MoVNb steel under combined ultrasonic surface rolling and shot peening, 2020, International Journal of Fatigue

The scientist frequently publishes in venues such as:

  • SSRN Electronic Journal
  • Surface and Coatings Technology
  • Journal of Alloys and Compounds
  • Materials Characterization
  • Journal of Materials Research and Technology

Collaborative work is an important aspect of Vincent Ji's research, with frequent co-authors including Ke Zhan, Chuanhai Jiang, Shilong Xing, Huabing Liu, and Chengxi Wang.

In addition to journal articles, Vincent Ji has contributed to book publications, such as a work published by Springer Nature titled Boundary Control of Flexible Three-Dimensional Euler-Bernoulli Beams in 2022.

Best Publications

  • A first-principles study on gas sensing properties of graphene and Pd-doped graphene

    Ling Ma;Ling Ma;Jian-Min Zhang;Ke-Wei Xu;Vincent Ji

  • Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al-Zn-Mg-Cu matrix composite

    Yu Ma;Yu Ma;Ahmed Addad;Gang Ji;Ming-Xing Zhang

  • General compliance transformation relation and applications for anisotropic hexagonal metals

    Jian-Min Zhang;Yan Zhang;Ke-Wei Xu;Vincent Ji

  • Finite element analysis of laser shock peening of 2050-T8 aluminum alloy

    Neila Hfaiedh;Patrice Peyre;Hongbin Song;Ioana Popa

  • Improving SO2 gas sensing properties of graphene by introducing dopant and defect: A first-principles study

    Xu-Ying Liu;Jian-Min Zhang;Ke-Wei Xu;Vincent Ji

  • Toughening effects of Mo and Nb addition on impact toughness and crack resistance of titanium alloys

    Shixing Huang;Qinyang Zhao;Yongqing Zhao;Cheng Lin

  • Investigation of magnetic properties, residual stress and densification in compacted iron powder specimens coated with polyepoxy

    H. Shokrollahi;K. Janghorban;F. Mazaleyrat;M. Lo Bue

  • Microstructure and residual stresses in Ti-6Al-4V alloy pulsed and unpulsed TIG welds

    B Mehdi;Riad Badji;V Ji;B Allili

  • Electronic and magnetic properties of pristine and chemically functionalized germanene nanoribbons

    Qing Pang;Yan Zhang;Jian-Min Zhang;Vincent Ji

  • Improvement in wear resistance of plasma sprayed yttria stabilized zirconia coating using nanostructured powder

    J.F. Li;H. Liao;X.Y. Wang;B. Normand

  • Residual stresses in surface induction hardening of steels : Comparison between experiment and simulation

    Dominique Coupard;Thierry Palin-luc;Philippe Bristiel;Vincent Ji

  • Young's modulus surface and Poisson's ratio curve for cubic metals

    Jian-Min Zhang;Yan Zhang;Ke-Wei Xu;Vincent Ji

  • Quantitative study of particle size distribution in an in-situ grown Al–TiB2 composite by synchrotron X-ray diffraction and electron microscopy

    Y. Tang;Z. Chen;A. Borbély;Gang Ji

  • First-principles study on electronic properties of SiC nanoribbon

    Jian-Min Zhang;Fang-Ling Zheng;Yan Zhang;Vincent Ji

  • Direct Fabrication of a Ti-47Al-2Cr-2Nb Alloy by Selective Laser Melting and Direct Metal Deposition Processes

    Thomas Vilaro;V. Kottman-Rexerodt;Marc Thomas;Christophe Colin

  • Microstructure and mechanical properties of friction stir processed Al–Mg–Si alloys dispersion-strengthened by nanosized TiB2 particles

    S.M. Ma;Peipei Zhang;Gang Ji;Z. Chen

  • Simultaneously increasing strength and ductility of nanoparticles reinforced Al composites via accumulative orthogonal extrusion process

    Jun Liu;Zhe Chen;Fengguo Zhang;Gang Ji

  • Competition between surface and strain energy during grain growth in free-standing and attached Ag and Cu films on Si substrates

    Jian-Min Zhang;Jian-Min Zhang;Ke-Wei Xu;Vincent Ji

  • Effect of shot peening on residual stress distribution and tribological behaviors of 17Cr2Ni2MoVNb steel

    Yalong Zhang;Yalong Zhang;Fuqiang Lai;Shengguan Qu;Vincent Ji

  • A comparison study of the structural and mechanical properties of cubic, tetragonal, monoclinic, and three orthorhombic phases of ZrO2

    Yan Zhang;Hua-Xin Chen;Li Duan;Ji-Bin Fan

  • Evaluation of the residual stress and microstructure character in SAF 2507 duplex stainless steel after multiple shot peening process

    Ming Chen;Huabing Liu;Lianbo Wang;Chengxi Wang

  • First-principles study of the perfect and vacancy defect AlN nanoribbon

    Fang-Ling Zheng;Jian-Min Zhang;Yan Zhang;Vincent Ji

  • Influence of shot peening on the fatigue life of laser hardened 17-4PH steel

    Zhou Wang;Chuanhai Jiang;Xiaoyan Gan;Yanhua Chen

  • Correlation of crystallization behavior and mechanical properties of thermal sprayed PEEK coating

    G. Zhang;H. Liao;H. Yu;V. Ji

Frequent Co-Authors

Ke-Wei Xu
Ke-Wei Xu Xi'an Jiaotong University
Patrice Peyre
Patrice Peyre Arts et Metiers Institute of Technology
Tao Zhang
Tao Zhang Chinese Academy of Sciences
Christian Coddet
Christian Coddet University of Technology of Belfort-Montbéliard
Paul K. Chu
Paul K. Chu City University of Hong Kong
Hanlin Liao
Hanlin Liao Centre national de la recherche scientifique, CNRS
Ahmed Addad
Ahmed Addad University of Lille
Weijie Lu
Weijie Lu Shanghai Jiao Tong University
Marc Thomas
Marc Thomas École de Technologie Supérieure
Subodh G. Mhaisalkar
Subodh G. Mhaisalkar Nanyang Technological University

If you think any of the details on this page are incorrect, let us know.

Report an issue

We appreciate your kind effort to assist us to improve this page, it would be helpful providing us with as much detail as possible in the text box below:

Best Scientists Citing Vincent Ji

Trending Scientists