Haiou Yang

Best Publications

• Residual stress and distortion of rectangular and S-shaped Ti-6Al-4V parts by Directed Energy Deposition: Modelling and experimental calibration

  Xufei Lu;Xin Lin;Michele Chiumenti;Miguel Cervera

  280
  Citations

• The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 718

  Shang Sui;Jing Chen;Enxiang Fan;Haiou Yang

  256
  Citations

• Solidification behaviour in laser cladding of AlCoCrCuFeNi high-entropy alloy on magnesium substrates

  T.M. Yue;H. Xie;X. Lin;H.O. Yang

  224
  Citations

• Strengthening mechanisms in selective laser-melted Inconel718 superalloy

  Shuya Zhang;Xin Lin;Lilin Wang;Xiaobin Yu

  221
  Citations

• Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming

  Y.L. Hu;X. Lin;S.Y. Zhang;Y.M. Jiang

  181
  Citations

• Grain morphology evolution and texture characterization of wire and arc additive manufactured Ti-6Al-4V

  Jian Wang;Jian Wang;Xin Lin;Xin Lin;Jitong Wang;Jitong Wang;Haiou Yang;Haiou Yang

  172
  Citations

• Microstructure and phase evolution in laser rapid forming of a functionally graded Ti-Rene88DT alloy

  X. Lin;Tai Man Yue;H. O. Yang;W. D. Huang

  159
  Citations

• Laser rapid forming of SS316L/Rene88DT graded material

  X. Lin;Tai Man Yue;H. O. Yang;W. D. Huang

  155
  Citations

• The influences of processing parameters on forming characterizations during laser rapid forming

  Yanmin Li;Yanmin Li;Haiou Yang;Xin Lin;Weidong Huang

  153
  Citations

• The formation and dissolution mechanisms of Laves phase in Inconel 718 fabricated by selective laser melting compared to directed energy deposition and cast

  Unknown

  151
  Citations

• Microstructure of Laser Re-Melted AlCoCrCuFeNi High Entropy Alloy Coatings Produced by Plasma Spraying

  Tai M. Yue;Hui Xie;Xin Lin;Haiou Yang

  121
  Citations

• Effect of tempering temperature on microstructure and mechanical properties of laser solid formed 300M steel

  Fenggang Liu;Xin Lin;Menghua Song;Haiou Yang

  117
  Citations

• Microstructure and Mechanical Properties of Al2O3/ZrO2 Directionally Solidified Eutectic Ceramic Prepared by Laser 3D Printing

  Zhi Liu;Kan Song;Bo Gao;Tian Tian

  115
  Citations

• Making selective-laser-melted high-strength Al–Mg–Sc–Zr alloy tough via ultrafine and heterogeneous microstructure

  Zihong Wang;Xin Lin;Nan Kang;Yanfang Wang

  108
  Citations

• HAZ Liquation Cracking Mechanism of IN-738LC Superalloy Prepared by Laser Solid Forming

  Jianjun Xu;Xin Lin;Yufan Zhao;Pengfei Guo

  100
  Citations

• Laser solid forming additive manufacturing TiB2 reinforced 2024Al composite: Microstructure and mechanical properties

  Xiaoli Wen;Qingzheng Wang;Qiang Mu;Nan Kang

  98
  Citations

• Laser powder bed fusion of high-strength Sc/Zr-modified Al–Mg alloy: phase selection, microstructural/mechanical heterogeneity, and tensile deformation behavior

  Zihong Wang;Xin Lin;Nan Kang;Jing Chen

  98
  Citations

• Laser surface forming of AlCoCrCuFeNi particle reinforced AZ91D matrix composites

  Guanghui Meng;Tai Man Yue;Xin Lin;Haiou Yang

  96
  Citations

• Anti-icing aluminum alloy surface with multi-level micro-nano textures constructed by picosecond laser

  Wei Xing;Zu Li;Haiou Yang;Xinlin Li

  93
  Citations

• Directed energy deposition additive manufacturing of a Sc/Zr-modified Al–Mg alloy: Effect of thermal history on microstructural evolution and mechanical properties

  Zihong Wang;Xin Lin;Nan Kang;Jing Chen

  82
  Citations