Dirk Heider

Best Publications

• Fiber Bragg grating sensors toward structural health monitoring in composite materials: challenges and solutions.

  Damien Kinet;Patrice Mégret;Keith W. Goossen;Liang Qiu

  553
  Citations

• Local damage detection using the two-dimensional gapped smoothing method

  M.K. Yoon;D. Heider;J.W. Gillespie;C.P. Ratcliffe

  244
  Citations

• Interfacial bonding strength of short carbon fiber/acrylonitrile-butadiene-styrene composites fabricated by fused deposition modeling

  Wei Zhang;Wei Zhang;Chase Cotton;Jessica Sun;Dirk Heider

  220
  Citations

• Flow rate control during vacuum-assisted resin transfer molding (VARTM) processing

  Unknown

  180
  Citations

• Flow front measurements and model validation in the vacuum assisted resin transfer molding process

  R. Mathuw;S. G. Advani;D. Heider;C. Hoffmann

  136
  Citations

• Characterization of residual stress and deformation in additively manufactured ABS polymer and composite specimens

  Wei Zhang;Wei Zhang;Amanda S. Wu;Jessica Sun;Zhenzhen Quan

  135
  Citations

• Process and performance evaluation of the Vacuum-Assisted Process

  W. Li;J. Krehl;J. W. Gillespie;D. Heider

  128
  Citations

• Vacuum assisted resin transfer molding (VARTM) in polymer matrix composites

  Unknown

  109
  Citations

• Thermal conductivities of three-dimensionally woven fabric composites

  Unknown

  100
  Citations

• Low Tortuous, Highly Conductive, and High-Areal-Capacity Battery Electrodes Enabled by Through-thickness Aligned Carbon Fiber Framework.

  Baohui Shi;Yuanyuan Shang;Yong Pei;Shaopeng Pei

  99
  Citations

• Inter-layer thermal contact resistance evolution with the degree of intimate contact in the processing of thermoplastic composite laminates

  Arthur Levy;Dirk Heider;John Tierney;John W Gillespie

  95
  Citations

• Experimental Investigation of the Controlled Atmospheric Pressure Resin Infusion (CAPRI) Process

  Christian Niggemann;Young Seok Song;John W. Gillespie;Dirk Heider

  90
  Citations

• Measurement of transverse permeability using gaseous and liquid flow

  Sebastian Scholz;John W. Gillespie;Dirk Heider

  88
  Citations

• Local Damage Detection with the Global Fitting Method Using Mode Shape Data in Notched Beams

  Unknown

  84
  Citations

• Post-filling flow in vacuum assisted resin transfer molding processes: Theoretical analysis

  Pavel Simacek;Dirk Heider;John W. Gillespie;Suresh Advani

  83
  Citations

• Measuring and modeling the thermal conductivities of three-dimensionally woven fabric composites

  Unknown

  82
  Citations

• Local Damage Detection with the Global Fitting Method Using Operating Deflection Shape Data

  Myung Keun Yoon;Dirk Heider;John W. Gillespie;Colin P. Ratcliffe

  79
  Citations

• Investigation into the use of low cost MEMS accelerometers for vibration based damage detection

  Colin Ratcliffe;Dirk Heider;Roger Crane;Carl Krauthauser

  77
  Citations

• Infusion design methodology for thick-section, low-permeability preforms using inter-laminar flow media

  Dirk Heider;Pavel Simacek;Aurimas Dominauskas;Hope Deffor

  70
  Citations

• Experimental validation of post-filling flow in vacuum assisted resin transfer molding processes

  Pavel Simacek;Ömer Eksik;Ömer Eksik;Dirk Heider;John W. Gillespie

  68
  Citations