World's Best Scientists 2026 revealed!
Marine Georesources and Geotechnology
H-index 16

Marine Georesources and Geotechnology

1064-119X

Published by: Taylor & Francis

https://www.tandfonline.com/loi/umgt20

Ranking & Metrics

Discipline name Position Best Scientists Publications D-Index
Earth Science 285 33 46 13
Engineering and Technology 643 42 59 13

Additional Metrics

Number of Best Scientists*: 91
Documents by Best Scientists*: 119
Top 100 Ranked Scientists*: 0
SCIMAGO H-index: 47
SCIMAGO SJR: 0.678
Impact Factor: 2.2

Overview

Top Research Topics at Marine Georesources & Geotechnology?

The scientific interests tackled in the journal are Geotechnical engineering, Sediment, Mineralogy, Consolidation (soil) and Submarine pipeline. Geotechnical engineering research presented in the journal encompasses a variety of subjects, including Soil water and Structural engineering. The research on Sediment featured in it combines topics in other fields like Sedimentary rock, Structural basin and Seafloor spreading, Oceanography.

It focused on Mineralogy research but expanded to cover Geochemistry. Most of the Bearing capacity studies addressed also intersect with Foundation (engineering). The study on Geomorphology presented in it intersects with subjects under the field of Continental shelf.

  • Geotechnical engineering (49.69%)
  • Sediment (13.71%)
  • Mineralogy (9.81%)

What are the most cited papers published in the journal?

  • Wave‐induced pore pressure in relation to ocean floor stability of cohesionless soils (225 citations)
  • Large landslides from oceanic volcanoes (205 citations)
  • Pleistocene slope instability of gas hydrate‐laden sediment on the Beaufort sea margin (182 citations)

Research areas of the most cited articles at Marine Georesources & Geotechnology:

The journal articles tackle a plethora of topics, such as Geotechnical engineering, Sediment, Mineralogy, Consolidation (soil) and Pore water pressure. The journal articles with studies in Geotechnical engineering featured incorporate elements of Soil water, Structural engineering and Cement. While the most cited articles focused on Sediment, they were also able to explore topics like Sedimentary rock, Structural basin, Penetration (firestop) and Oceanography.

What topics the last edition of the journal is best known for?

  • Composite material
  • Structural engineering
  • Statistics

The previous edition focused in particular on these issues:

Marine Georesources & Geotechnology was organized to reinforce research efforts on Geotechnical engineering, Foundation (engineering), Calcareous, Bearing capacity and Pile. Studies on Geotechnical engineering discussed in Marine Georesources & Geotechnology link to the field of Stress (mechanics). Marine Georesources & Geotechnology investigates Foundation (engineering) research which frequently intersects with Submarine pipeline.

The most cited articles from the last journal are:

  • Mechanical properties of calcareous silts in a hydraulic fill island-reef (18 citations)
  • Prediction of local scour around circular piles under waves using a novel artificial intelligence approach (16 citations)
  • The influence of particle morphology on microbially induced CaCO3 clogging in granular media (9 citations)

Papers citation over time

A key indicator for each journal is its effectiveness in reaching other researchers with the papers published at that venue.

The chart below presents the interquartile range (first quartile 25%, median 50% and third quartile 75%) of the number of citations of articles over time.

The top authors publishing in Marine Georesources & Geotechnology (based on the number of publications) are:

  • Xiuqing Hu (16 papers) published 7 papers at the last edition, 3 more than at the previous edition,
  • Tae-Hyung Kim (14 papers) published 1 paper at the last edition,
  • Abolfazl Eslami (13 papers) published 1 paper at the last edition, 1 less than at the previous edition,
  • Rahul Sharma (12 papers) absent at the last edition,
  • S. Narasimha Rao (12 papers) absent at the last edition.

The overall trend for top authors publishing in this journal is outlined below. The chart shows the number of publications at each edition of the journal for top authors.

Only papers with recognized affiliations are considered

The top affiliations publishing in Marine Georesources & Geotechnology (based on the number of publications) are:

  • Hohai University (65 papers) published 12 papers at the last edition, 6 more than at the previous edition,
  • Zhejiang University (44 papers) published 8 papers at the last edition, 1 more than at the previous edition,
  • Chinese Academy of Sciences (43 papers) published 10 papers at the last edition, 5 more than at the previous edition,
  • Tongji University (41 papers) published 7 papers at the last edition the same number as at the previous edition,
  • Southeast University (36 papers) published 2 papers at the last edition the same number as at the previous edition.

The overall trend for top affiliations publishing in this journal is outlined below. The chart shows the number of publications at each edition of the journal for top affiliations.

Publication chance based on affiliation

The publication chance index shows the ratio of articles published by the best research institutions in the journal edition to all articles published within that journal. The best research institutions were selected based on the largest number of articles published during all editions of the journal.

The chart below presents the percentage ratio of articles from top institutions (based on their ranking of total papers).Top affiliations were grouped by their rank into the following tiers: top 1-10, top 11-20, top 21-50, and top 51+. Only articles with a recognized affiliation are considered.

During the most recent 2021 edition, 3.52% of publications had an unrecognized affiliation. Out of the publications with recognized affiliations, 35.42% were posted by at least one author from the top 10 institutions publishing in the journal. Another 9.90% included authors affiliated with research institutions from the top 11-20 affiliations. Institutions from the 21-50 range included 16.67% of all publications and 38.02% were from other institutions.

Returning Authors Index

A very common phenomenon observed among researchers publishing scientific articles is the intentional selection of journals they have already attended in the past. In particular, it is worth analyzing the case when the authors participate in the same journal from year to year.

The Returning Authors Index presented below illustrates the ratio of authors who participated in both a given as well as the previous edition of the journal in relation to all participants in a given year.

Returning Institution Index

The graph below shows the Returning Institution Index, illustrating the ratio of institutions that participated in both a given and the previous edition of the conference in relation to all affiliations present in a given year.

The experience to innovation index

Our experience to innovation index was created to show a cross-section of the experience level of authors publishing in a journal. The index includes the authors publishing at the last edition of a journal, grouped by total number of publications throughout their academic career (P) and the total number of citations of these publications ever received (C).

The group intervals were selected empirically to best show the diversity of the authors' experiences, their labels were selected as a convenience, not as judgment. The authors were divided into the following groups:

  • Novice - P < 5 or C < 25 (the number of publications less than 5 or the number of citations less than 25),
  • Competent - P < 10 or C < 100 (the number of publications less than 10 or the number of citations less than 100),
  • Experienced - P < 25 or C < 625 (the number of publications less than 25 or the number of citations less than 625),
  • Master - P < 50 or C < 2500 (the number of publications less than 50 or the number of citations less than 2500),
  • Star - P ≥ 50 and C ≥ 2500 (both the number of publications greater than 50 and the number of citations greater than 2500).

The chart below illustrates experience levels of first authors in cases of publications with multiple authors.

Top Publications

  • Bearing capacity of conical footing on anisotropic and heterogeneous clays using FEA and ANN

    (2022)
    40 Citations
  • Application of flocculation combined with vacuum preloading to reduce river-dredged sludge

    Feiyu Liu;Wenqing Wu;Hongtao Fu;Jun Wang

    (2020)
    36 Citations
  • Discrete-element numerical modelling method for studying mechanical response of methane-hydrate-bearing specimens

    (2020)
    33 Citations
  • Pile group in clay under cyclic lateral loading with emphasis on bending moment: Numerical modelling

    (2022)
    33 Citations
  • The influence of particle morphology on microbially induced CaCO3 clogging in granular media

    Chenpeng Song;Chenpeng Song;Derek Elsworth;Sheng Zhi;Chaoyi Wang

    (2021)
    31 Citations
  • Influence of cap size and strength on settlements of TDM-piled embankments over soft ground

    Chana Phutthananon;Pornkasem Jongpradist;Pitthaya Jamsawang

    (2020)
    30 Citations
  • Gradation affects basic mechanical characteristics of Chinese calcareous sand as airport subgrade of reefs

    Shen Yang;Xue Shen;Hanlong Liu;Hanlong Liu;Huayang Ge

    (2020)
    27 Citations

Related Online Degrees & Career Pathways

Exploring engineering and technology in the USA opens the door to diverse educational paths and career opportunities. Many students seek flexible and affordable options, making online degrees a popular choice. For those interested in computing, the cheapest online computer engineering degree programs offer a practical way to gain essential skills without significant financial strain.

Leadership roles in tech and engineering fields often benefit from advanced education. Pursuing a doctorate in leadership can equip professionals with strategic insight and management expertise to advance their careers.

For those looking to quickly enter the workforce or pivot careers, enrolling in one of the quickest associates degree programs online provides an accessible route to foundational knowledge in technical fields without a long-term commitment.

In specialized areas like infrastructure and project oversight, a masters in construction management offers advanced training critical for managing complex projects and teams. These diverse online programs make career advancement achievable, regardless of your starting point.

Best Scientists Contributing to This Journal